[Xenomai] patch for 3.14 kernel ?
Huub Van Niekerk
huubvanniekerk at yahoo.com
Tue Apr 8 18:34:41 CEST 2014
On Tuesday, April 8, 2014 5:01 PM, Gilles Chanteperdrix <gilles.chanteperdrix at xenomai.org> wrote:
On 04/08/2014 03:59 PM, Huub Van Niekerk wrote:
> On Tuesday, April 8, 2014 2:55 PM, Gilles Chanteperdrix
> <gilles.chanteperdrix at xenomai.org> wrote:
> On 04/08/2014 02:47 PM, Huub Van Niekerk wrote:
>> Right now I can't test anything under the 3.10.18 kernel since for
>> some weird reason (which has nothing to do with Xenomai) my network
>> and USB (combined on my board) is off. With the same configuration
>> file, the 3.14 kernel works fine.
>> In 3.10 kernel, a new configuration disabled by default is the USB
>> PHY. You need to select the USB PHY corresponding to your board. If
>> you want to boot using NFS, you have to enable the PHY as built-in
>> in addition to the built-in network controller. I did that for the
>> pandaboard (which uses the same network adapter as Beagle-XM I
>> believe), and it boots just fine using NFS.
> I had the 3.10.18 kernel working (with xenomai), including the
> smsc95xx, usb phy, usb hid, etc. Just the clock didnt work. For some
> reason now all of USB and networking is off. I already triple-checked
> all options, and so far no solution.
>If everything runs as module, have you installed the module and run
>depmod -a ?
What I can put as built-in, I do. So that's what I did for all of them.
More information about the Xenomai