Help: System freeze when edge interrupt trigger, Xenomain3.0.8, ipipe-arm main line, am335x

Michael Nazzareno Trimarchi michael at amarulasolutions.com
Sat Jan 26 11:26:23 CET 2019


Hi JackZhang

On Sat, Jan 26, 2019 at 11:18 AM Michael Nazzareno Trimarchi
<michael at amarulasolutions.com> wrote:
>
> Hi JackZhang
>
> On Sat, Jan 26, 2019 at 11:01 AM JackZhang <kunzj at 126.com> wrote:
> >
> > Thanks, Michael
> > I have kernel 4.1.18 + xenomai 3.0.6 works too, but can't work with ti's drm drivers.
> > Ti's sdk[1] with own kernel based on 4.1.18, can not work with ipipe patch, and i it's
> > hard to solve the conflict.
> >
> > Now, Ti's drm driver code is in the new kernel 4.14, so the best way is that ipipe-arm
> > can work with the 4.14 kernel.
>
> What is you requirement? Running opengl qt application + realtime?

Read now the link. Any log?

Michael
>
> Michael
>
> >
> > [1]. http://processors.wiki.ti.com/index.php?title=Processor_SDK_Linux_Release_Notes&oldid=214754
> >
> > At 2019-01-26 17:36:34, "Michael Nazzareno Trimarchi" <michael at amarulasolutions.com> wrote:
> >
> > >Hi Jack
> > >
> > >
> > >On Sat, Jan 26, 2019 at 10:20 AM JackZhang via Xenomai
> > ><xenomai at xenomai.org> wrote:
> > >>
> > >> Hi, Grep, thanks.
> > >>
> > >>
> > >>
> > >> >Have you tried this with the 4.9 or 4.4 kernel and ipipe patch? I
> > >> >think 4.4 (which is based on a SLTS) has been tested on beaglebone
> > >> >(similar processor). Did you mean kernel 4.14 not 3.14?
> > >>
> > >>   I mean kernel 4.14. Sorry for mistake.
> > >> >I think I've reproduced this on a Beaglebone which is based on a
> > >> >similar processor, I'll look into it this week.
> > >>   Thank you very much!
> > >
> > >I have 4.1.6 + xenomai 3.0.7 and seems that it works
> > >
> > >Michael
> > >
> > >>
> > >>
> > >> 在 2019-01-22 23:18:03,"Greg Gallagher" <greg at embeddedgreg.com> 写道:
> > >> >On Tue, Jan 22, 2019 at 5:34 AM 张建昆 via Xenomai <xenomai at xenomai.org> wrote:
> > >> >>
> > >> >> Hello everyone, here is some new clues:
> > >> >> 1. I tried xenomai 3.0.8, kernel 3.14.17 and ipipe-core-4.14.71-arm-4.patch. Still the same question.
> > >> >
> > >> >Have you tried this with the 4.9 or 4.4 kernel and ipipe patch?  I
> > >> >think 4.4 (which is based on a SLTS) has been tested on beaglebone
> > >> >(similar processor). Did you mean kernel 4.14 not 3.14?
> > >> >
> > >> >> 2. It seems the system is locked up once a gpio interrupt is triggered.
> > >> >>
> > >> >> 3. Some debug information show that, once a gpio interrupt is triggered, the function
> > >> >>
> > >> >>     'omap_gpio_irq_handler' is triggered all the time.
> > >> >I think I've reproduced this on a Beaglebone which is based on a
> > >> >similar processor, I'll look into it this week.
> > >> >
> > >> >> There may be a little bug exists, but i don't know how to amend it. Thank you very much, if anyone can help.
> > >> >>
> > >> >
> > >> >-Greg
> > >> >> >------------------------------
> > >> >> >
> > >> >> >Message: 3
> > >> >> >Date: Fri, 18 Jan 2019 11:48:12 +0800 (CST)
> > >> >> >From: 张建昆 <kunzj at 126.com>
> > >> >> >To: xenomai at xenomai.org
> > >> >> >Subject: Help: System freeze when edge interrupt trigger,
> > >> >> >       Xenomain3.0.8, ipipe-arm main line, am335x
> > >> >> >Message-ID: <55c89c76.3420.1685f12c488.Coremail.kunzj at 126.com>
> > >> >> >Content-Type: text/plain; charset="gbk"
> > >> >> >
> > >> >> >Hello!
> > >> >> >    The system freeze when interrupt is triggered. I clone ipipe-arm master, and use xenomai 3.0.8 following xenomai startup tutorial.
> > >> >> >The hardware cpu is am3358. System works fine after start up, but the system immediately locks up when a edge interrupt. For example,
> > >> >> >the mmc card in pluged in. Is it something worng ? Thank you very much!
> > >> >> >
> > >> >> >    The kernel config file and dts attached.
> > >> >> >
> > >> >> >
> > >> >> >-------------- next part --------------
> > >> >> >A non-text attachment was scrubbed...
> > >> >> >Name: .config
> > >> >> >Type: application/octet-stream
> > >> >> >Size: 129591 bytes
> > >> >> >Desc: not available
> > >> >> >URL: <http://xenomai.org/pipermail/xenomai/attachments/20190118/538175f9/attachment.obj>
> > >> >> >-------------- next part --------------
> > >> >> >A non-text attachment was scrubbed...
> > >> >> >Name: am335x-dnk-v1_LCD800x480_TM070RDH13.dts
> > >> >> >Type: application/octet-stream
> > >> >> >Size: 29436 bytes
> > >> >> >Desc: not available
> > >> >> >URL: <http://xenomai.org/pipermail/xenomai/attachments/20190118/538175f9/attachment-0001.obj>
> > >> >> >
> > >> >> >------------------------------
> > >> >> >
> > >> >> >Subject: Digest Footer
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> >------------------------------
> > >> >> >
> > >> >> >End of Xenomai Digest, Vol 81, Issue 17
> > >> >> >***************************************
> > >
> > >
> > >
> > >--
> > >| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
> > >| COO  -  Founder                                      Cruquiuskade 47 |
> > >| +31(0)851119172                                 Amsterdam 1018 AM NL |
> > >|                  [`as] http://www.amarulasolutions.com               |
>
>
>
> --
> | Michael Nazzareno Trimarchi                     Amarula Solutions BV |
> | COO  -  Founder                                      Cruquiuskade 47 |
> | +31(0)851119172                                 Amsterdam 1018 AM NL |
> |                  [`as] http://www.amarulasolutions.com               |



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |



More information about the Xenomai mailing list