[RTnet] RTcfg: error -11
miethben at b-tu.de
Mon Mar 9 15:58:30 CET 2020
i try to get RTnet up and running, but there are some issues with setup.
Two system are connected via a switch. Both have 2 network interface,
Intel i210 and Intel 82574L. Only Intel i210 is used by Xenomai/ RTnet.
One system is configured as master in 'rtnet.conf', the other one as a
slave. If 'rtnet start' is executed following outputs appears.
> Waiting for all slaves...
> Stage 1: searching for master...
RT interface came up as 'rtifconfig' is shown, but both hang on there stages.
At master the dmesg output are floated with messages like:
> [ 323.903321] rt_igb: rteth0: Reset adapter
> [ 323.905082] TDMA: Failed to transmit sync frame!
> [ 323.910082] TDMA: Failed to transmit sync frame!
> [ 323.915083] TDMA: Failed to transmit sync frame!
> [ 323.920083] TDMA: Failed to transmit sync frame!
> [ 323.932087] RTcfg: error -11 while sending stage 1 frame
Anybody knows that error -11 means? I can't find any information on
this error code.
More information about the Xenomai